This is the stair landing after it was assembled and a coat of sanding sealer applied to both sides. It is constructed to resemble a sunburst. The rays follow the turn that must be made to go up to the next string of stairs.
This is in the pain staking process of gluing up the tapered ash boards. Only four to five boards could be glued at a time because of the angles changing so quickly with each board.
This is the tapering jig I made up to make cut the boards for the landing.
This is the landing before the new one was installed
This is the new landing installed
This is the stairs with carpet and painted skirt boards.
This is the new look with the ash treads and risers. (
Looking down the carpeted stairway
Looking down the stairway once the ash landing, treads and risers have been installed
Custom made ash window casing
Custom made front door and window casing
