 This is the front side of the Shopsmith with the included accessories sitting on it |
 This is the rear showing the chip/dust collector hoses and storage for the chips and dust |
 This is the variable speed dial and the Forward/Reverse and off switch |
 This is showing the Mark 7 & Mark VII model plates |
 These are the accessories that go with the Shopsmith |
|
|
1. Miter guage 2. Fence 3. Drill chuck 4. Mortising attachment with 1/2 inch chisel and bit 5. Drum sanding attachment 6. Wrenches 7. Shaper table insert 8. Saw blade insert 9. 10 inch saw blade, arbor and lower guard with dust collecting shroud and connector 10. Sanding Disc attachment 11. Lathe tailstock 12. Lathe Tool Rest 13. Lathe faceplate 14. Lathe Spur 15. Lathe tailstock center (bearing) 16. Dado set with arbor 17. Extension table |